Good Condition for Komatsu PC300-7 Amphibious Excavator with Undercarriage Pontoon

Good Condition for Komatsu PC300-7 Amphibious Excavator with Undercarriage Pontoon

We UNION mainly produce 6Ton to 50Ton amphibious excavator. According to your requests, we could assemble different brand names and product excavator upper parts, like PC200, HITACHI ZX210, DH215, EX120,CAT315…. Also, if you have crawler excavator (New or Used) , we can only make amphibious undercarriage (Pontoon Undercarriage) for you. CZPTly wish could have odds to do businss with you and welcome you to go to our manufacturing facility!

 

UNION AMPHIBIOUS EXCAVATOR COULD BE Used TO DO

one.Deepening of canal, river channel and river mouth

2.Swamp land clearing at mining area, plantation and forest

three.Building bund for flood prevention and land reclamation

4.Constructing bund wall for fish and shimp ponds and salt making sector

five.Sludge clearing of lakes, ponds and h2o reservoir

six.Digging trenches for oil and gasoline piping set up

seven.Transporting and clearing landslide and flood hit area

8.Swamps and wetlands construction

nine.Highway development via wetlands.

SPECIFICATION OF UCM2000FT (KOMATSU three hundred-seven Prime PART )

Motor
Design Doosan
Kind 6-cylinder, mechanical injection, turbocharged, h2o cooled
Rated energy 106.5kw
Rated pace 2050rpm
Principal CZPT Specification
Operating weight 30000kg
CZPT bucket capacity .9m3
Slewing velocity 11rpm
Stick digging pressure 97.64KN
Bucket digging force 122.85KN
CZPT System
Major pump Kawasaki
Principal valve Kawasaki
Motor Korea
CZPT force 32Mpa
Touring Program
Touring speed ~5.4Km/h
Grade potential sixty five%
Floor force .014Mpa
Proportions
All round length 11200mm
Total width 5350mm
General top 3900mm
Ground clearance 1192mm
Rear-conclude duration/Slewing radius 2801mm
Width of pontoon 1700mm
Duration of pontoon 8500mm
Peak of pontoon 1800mm
Operating Scope
Stick size 2900mm
A: Max chopping height 1571mm
B: Max dumping peak 7810mm
C: Max digging depth 5704mm
D: Max get to 19900mm

 

Dimensions ( UCM300FT ) mm
A Track length 9000
B Ground contact length of tracks 5200
C Tail swing radius 2750
D Overall length 11200
E Overall height (to the top of arm) 3880
F Ground clearance of counter weight 2571
H Overall width 4940
I Track gauge 3440
J Track width 1500
K Ground clearance 1140
L Track height 1840
M Overall height (to the top of cab) 3870
N Width of the top part 2710 

Particulars of manufacture:

 

FAQ

Q: How to install ?

A: 1., a floating box landing, the two by means of the tube into the floating box hole, inserted in the facet of the tube, a piece of wood pad, so that the lateral tilt
two. drop an additional pontoon and position it through two tubes
three. soon after the tube is inserted, the tube is set by the bolt
four.. Enlarge the plate to the tank and use the U card to repair it
5., the upper part of the excavator hoist, put on the marketplace, with extensive eyes on the Qi, tighten the screws
six. connect the hydraulic oil pipe, connect the oil pipe of the motor on the float box to the excavator

Q:How to run?

A : 1., prohibit the operation of a lot more than 1.six meters water depth, silt is not constrained to depth
two., prohibited in the uneven, the remaining and right sides of the floating box, the emphasis of fantastic disparity in the scenario, going for walks functions
three. amphibious excavators use sluggish equipment whilst going for walks, and do not use fast equipment
4., commence the strolling condition, the 1st step on the foot of the throttle, and then wander
5. do not press challenging objects even though walking
six. keep away from long going for walks on the difficult surface
7. when turning, the entrance of the floating entire body can be lifted by the energy of the bucket, and when the angle is shifted, the working of the chain plate can be prevented, and the derailment of the chain plate can be avoided

Q: How to maintain?

A:1. ensure the chain rigidity, free scenario need to be adjusted to 3-five, a chain wheel suspension observe shall prevail
2. make sure that the seat four screws, and make certain ten days (or perform 80 hrs) to defeat the butter
3. prime silk, defeat butter when a week
Check the screws among the four. chains and the chain, check out the screws usually and keep the screws limited

Model: KOMATSU
Product: PC300
Type: Amphibious Excavator
Calendar year: 2016
Condition: Used
CZPT: Superb
Packing: In Bulk or in Container
Port: ZheJiang
Supply Time: Inside fifteen times

We have the most thorough info about the equipment, if you want, make sure you make contact with we freely, we will try out our best to fulfill you.

We also offer crawler cranes, truck cranes, bulldozers, , wheel loaders, street rollers, motor graders, and so forth
Bear in mind our thought: Providers to create value, share a greater future.

For your Success!

Good Condition for Komatsu PC300-7 Amphibious Excavator with Undercarriage Pontoon

Tags