China Black Finished Alloy Steel G80 Load Chain safety chain for bush hog

Product Description

G80 Welded Galvanized Lifting Chain
It is designed and created for superior overall performance and use. It can effortlessly endure a lot more abuse, abrasion resistance, increased load lifting per siz. It is ligher to deal with for lifting operatons.

Material alloy steel, heat dealt with and evidence examined.
Basic safety issue 4: 1
Tougher and much more dependable for lifting application.
Reduce downtime operation and much more sturdy surpassed safety report.
Fnish: Obtainable with self-colored, black tempered, blue painted, and purple painted.
Completely embossed with desired marking for straightforward identification and traceability.

Item Identify G80 lifting chain
Common EN818-2,GB/T20652,GB/T12718,GB/T20946,DIN5685.
Size 6MM-22MM
Material Alloy metal/carbon metal/stainless metal
Power Quality G43,G63,G70,G80
Elongation of Chain Breaking ≥ sixteen%
Feature It can stand up to much more abuse, abrasion resistance
Tougher and a lot more trustworthy for lifting software
Do 2.4 times of WLL manufacturing validation strength tensile check.
Safety aspect: Min.5:one
Extended service daily life
Packing Listing Plywood reel/plastic reel/plastic drum/gunny bag/iron drum+plywood pallet/iron pallet
Delivery Time 20~40days
Application G100 lifting chain is employed for overhead lifting ,dragging ,chain slings ,and many others
End Self-coloured, black tempered, electro galvanized, very hot dip galvanized, painted.

Chain dia.
b (mm)
Inside duration
t (mm)
Inside width
b1. (mm)
Exterior width
b2. (mm)
Doing work load (t) Breaking load (t) Bodyweight
(kg/m)
three 9.00 three.eighty 10.70 .36 fourteen.ten .21
4 twelve.00 five.00 14.30 .sixty three 25.10 .35
5 15.00 6.30 sixteen.50 1.00 3.sixteen .fifty
six eighteen.00 7.50 20.00 1.44 four.fifty six .eighty
six.three 19.eighty 8.twenty 20.80 one.60 five.00 .84
seven 21.00 9.00 24.50 one.92 6.00 1.10
seven.one 21.30 nine.00 24.50 2.00 6.32 one.fifteen
eight 24.00 10.00 28.00 2.50 eight.00 one.40
nine 27.00 eleven.00 31.fifty 3.15 10.20 one.82
ten 30.00 12.fifty 35.00 four.00 twelve.80 two.20
11 33.00 12.60 36.50 four.twenty 15.20 two.33
twelve 36.00 fifteen.00 42.00 four.60 eighteen.40 three.ten
13 39.00 sixteen.30 forty six.00 5.30 21.twenty 3.70
fourteen 42.00 18.00 forty nine.00 six.thirty twenty five.twenty 4.thirteen
fifteen 46.00 20.00 52.00 seven.00 28.00 5.17
sixteen forty eight.00 twenty.00 56.00 8.00 32.00 5.sixty three
eighteen 54.00 23.00 63.00 ten.00 forty.00 6.eighty five
19 57.00 23.70 63.twenty eleven.30 45.20 seven.80
twenty sixty.00 twenty five.00 70.000 twelve.fifty 50.00 8.sixty
22 sixty six.00 28.00 77.00 fifteen.30 61.20 11.00
24 72.00 32.00 82.00 18.00 seventy two.00 twelve.80
26 78.00 35.00 91.00 21.30 85.20 14.ninety
32 ninety.00 38.00 one zero five.00 28.thirty 113.twenty 19.sixty
34 102.00 46.50 121.20 36.30 a hundred forty five.twenty 25.fifty
36 108.00 49.50 128.fifty 40.70 162.eighty 31.00
38 114.00 52.00 136.00 45.30 181.twenty 32.00
42 126.00 55.fifty one hundred forty four.fifty fifty five.forty 221.60 38.60
48 a hundred and forty four.00 62.40 177.sixty seventy two.thirty 289.twenty 52.00
50 150.00 sixty five.00 185.00 80.00 320.00 fifty six.00
fifty two 156.00 67.60 192.forty eighty five.00 340.00 59.00
56 168.00 seventy two.80 207.twenty 100.00 four hundred.00 seventy two.fifty
63 one hundred ninety.00 eighty one.ninety 233.ten a hundred twenty five.00 five hundred.00 89.00
72 210.00 ninety one.00 259.00 one hundred sixty.00 640.00 110.00

If you want far more particulars or have any questions, remember to really feel cost-free to make contact with us, we are more than happy to do any aid. Many thanks!

US $0.3-5
/ Meter
|
200 Meters

(Min. Order)

###

Usage: Heavy Duty Lifting
Material: Alloy
Surface Treatment: Baking Paint
Feature: Heat Resistant
Chain Size: 7mm-13mm
Structure: Welded Chain

###

Samples:
US$ 2/Meter
1 Meter(Min.Order)

|
Request Sample

###

Customization:

###

Product Name G80 lifting chain
Standard EN818-2,GB/T20652,GB/T12718,GB/T20946,DIN5685.
Size 6MM-22MM
Material Alloy steel/carbon steel/stainless steel
Strength Grade G43,G63,G70,G80
Elongation of Chain Breaking ≥ 16%
Feature It can withstand more abuse, abrasion resistance
Tougher and more reliable for lifting application
Do 2.4 times of WLL manufacturing validation strength tensile test.
Safety factor: Min.5:1
Long service life
Packing List Plywood reel/plastic reel/plastic drum/gunny bag/iron drum+plywood pallet/iron pallet
Delivery Time 20~40days
Application G100 lifting chain is used for overhead lifting ,dragging ,chain slings ,etc
Finish Self-colored, black tempered, electro galvanized, hot dip galvanized, painted.

###

Chain dia.
b (mm)
Inside length
t (mm)
Inside width
b1. (mm)
Outside width
b2. (mm)
Working load (t) Breaking load (t) Weight
(kg/m)
3 9.00 3.80 10.70 0.36 14.10 0.21
4 12.00 5.00 14.30 0.63 25.10 0.35
5 15.00 6.30 16.50 1.00 3.16 0.50
6 18.00 7.50 20.00 1.44 4.56 0.80
6.3 19.80 8.20 20.80 1.60 5.00 0.84
7 21.00 9.00 24.50 1.92 6.00 1.10
7.1 21.30 9.00 24.50 2.00 6.32 1.15
8 24.00 10.00 28.00 2.50 8.00 1.40
9 27.00 11.00 31.50 3.15 10.20 1.82
10 30.00 12.50 35.00 4.00 12.80 2.20
11 33.00 12.60 36.50 4.20 15.20 2.33
12 36.00 15.00 42.00 4.60 18.40 3.10
13 39.00 16.30 46.00 5.30 21.20 3.70
14 42.00 18.00 49.00 6.30 25.20 4.13
15 46.00 20.00 52.00 7.00 28.00 5.17
16 48.00 20.00 56.00 8.00 32.00 5.63
18 54.00 23.00 63.00 10.00 40.00 6.85
19 57.00 23.70 63.20 11.30 45.20 7.80
20 60.00 25.00 70.000 12.50 50.00 8.60
22 66.00 28.00 77.00 15.30 61.20 11.00
24 72.00 32.00 82.00 18.00 72.00 12.80
26 78.00 35.00 91.00 21.30 85.20 14.90
32 90.00 38.00 105.00 28.30 113.20 19.60
34 102.00 46.50 121.20 36.30 145.20 25.50
36 108.00 49.50 128.50 40.70 162.80 31.00
38 114.00 52.00 136.00 45.30 181.20 32.00
42 126.00 55.50 144.50 55.40 221.60 38.60
48 144.00 62.40 177.60 72.30 289.20 52.00
50 150.00 65.00 185.00 80.00 320.00 56.00
52 156.00 67.60 192.40 85.00 340.00 59.00
56 168.00 72.80 207.20 100.00 400.00 72.50
63 190.00 81.90 233.10 125.00 500.00 89.00
72 210.00 91.00 259.00 160.00 640.00 110.00
US $0.3-5
/ Meter
|
200 Meters

(Min. Order)

###

Usage: Heavy Duty Lifting
Material: Alloy
Surface Treatment: Baking Paint
Feature: Heat Resistant
Chain Size: 7mm-13mm
Structure: Welded Chain

###

Samples:
US$ 2/Meter
1 Meter(Min.Order)

|
Request Sample

###

Customization:

###

Product Name G80 lifting chain
Standard EN818-2,GB/T20652,GB/T12718,GB/T20946,DIN5685.
Size 6MM-22MM
Material Alloy steel/carbon steel/stainless steel
Strength Grade G43,G63,G70,G80
Elongation of Chain Breaking ≥ 16%
Feature It can withstand more abuse, abrasion resistance
Tougher and more reliable for lifting application
Do 2.4 times of WLL manufacturing validation strength tensile test.
Safety factor: Min.5:1
Long service life
Packing List Plywood reel/plastic reel/plastic drum/gunny bag/iron drum+plywood pallet/iron pallet
Delivery Time 20~40days
Application G100 lifting chain is used for overhead lifting ,dragging ,chain slings ,etc
Finish Self-colored, black tempered, electro galvanized, hot dip galvanized, painted.

###

Chain dia.
b (mm)
Inside length
t (mm)
Inside width
b1. (mm)
Outside width
b2. (mm)
Working load (t) Breaking load (t) Weight
(kg/m)
3 9.00 3.80 10.70 0.36 14.10 0.21
4 12.00 5.00 14.30 0.63 25.10 0.35
5 15.00 6.30 16.50 1.00 3.16 0.50
6 18.00 7.50 20.00 1.44 4.56 0.80
6.3 19.80 8.20 20.80 1.60 5.00 0.84
7 21.00 9.00 24.50 1.92 6.00 1.10
7.1 21.30 9.00 24.50 2.00 6.32 1.15
8 24.00 10.00 28.00 2.50 8.00 1.40
9 27.00 11.00 31.50 3.15 10.20 1.82
10 30.00 12.50 35.00 4.00 12.80 2.20
11 33.00 12.60 36.50 4.20 15.20 2.33
12 36.00 15.00 42.00 4.60 18.40 3.10
13 39.00 16.30 46.00 5.30 21.20 3.70
14 42.00 18.00 49.00 6.30 25.20 4.13
15 46.00 20.00 52.00 7.00 28.00 5.17
16 48.00 20.00 56.00 8.00 32.00 5.63
18 54.00 23.00 63.00 10.00 40.00 6.85
19 57.00 23.70 63.20 11.30 45.20 7.80
20 60.00 25.00 70.000 12.50 50.00 8.60
22 66.00 28.00 77.00 15.30 61.20 11.00
24 72.00 32.00 82.00 18.00 72.00 12.80
26 78.00 35.00 91.00 21.30 85.20 14.90
32 90.00 38.00 105.00 28.30 113.20 19.60
34 102.00 46.50 121.20 36.30 145.20 25.50
36 108.00 49.50 128.50 40.70 162.80 31.00
38 114.00 52.00 136.00 45.30 181.20 32.00
42 126.00 55.50 144.50 55.40 221.60 38.60
48 144.00 62.40 177.60 72.30 289.20 52.00
50 150.00 65.00 185.00 80.00 320.00 56.00
52 156.00 67.60 192.40 85.00 340.00 59.00
56 168.00 72.80 207.20 100.00 400.00 72.50
63 190.00 81.90 233.10 125.00 500.00 89.00
72 210.00 91.00 259.00 160.00 640.00 110.00

buy drive chain

Buying a drive chain requires a certain understading of its characteristics. This article discusses the different types of chains available, including Silent, Flat-top, and Duplex. By the end of this article, you should have a basic understanding of what each type of chain is for. First, here are some basic rules to keep in mind when shopping for a chain. To find the drive chain that best suits your needs, read on.

roller chain

Choosing the right roller chain for your drive chain depends on several factors. First, you have to determine the motor horsepower and rpm for the small drive sprocket. These values ​​determine the size of the chain and the number of teeth on the drive sprocket. Next, you need to determine the size of the conveyor chain, it can be the horizontal, vertical, or curved radius. Depending on your specific needs, you can also choose between two-strand or three-strand chains.
The roller chain of the drive chain must be properly tensioned. It should also have a proper lubrication system. Chain sag should not exceed two to four percent of the center distance (the distance between the two axles). Also, it shouldn’t make any unusual noises or obvious problems. One of the main reasons for excessive wear is the size of the load. Each chain has a specified maximum working load.
The maximum roller chain load must be less than 1/9 or 6 times the tensile strength of the drive chain. This amount should not exceed this threshold, as exceeding this level will result in chain plate fatigue. To avoid this, you should use a roller chain with a higher number of strands. Also, for high power requirements, a roller chain with a higher number of strands is recommended. One final tip for choosing a drive chain: it should not be used when there is a high risk of corrosion or rusting.
The materials used to manufacture roller chains vary according to the specific application. Common materials include steel and stainless steel. However, stainless steel is used in food processing machinery and other environments that require lubrication. Brass and nylon are also sometimes used. These factors determine the selection of suitable materials for the drive chain. If you are not sure which material to use, you can consult an industry professional. These professionals will help you choose the right chain for the job at hand.
chain

mute chain

The design of the silent transmission chain is as follows: the large chain plates 2 are stacked one on top of the other in the direction of the chain length. The connecting rods are connected by connecting pins 3. The outermost and central guide plates 4 are fastened to the connecting pins 3 by means of rivets. This construction helps minimize friction on the sliding surfaces of the chain. Chainplate 2 of the silent transmission chain is usually made of stainless steel.
The link plates are made of steel and have a rectangular shape with pinholes 41. These guide plates have no teeth but have curved surfaces that guide the silent drive chain on the sprockets. In addition, the rear portion of the guide plate is higher than the portion of the chainplate. This feature improves pitch balance. The present invention is also applicable to silent transmission chains using rockers.
When it comes to chain design, it’s important to remember that silent drive chains are often used in automotive engines, especially timing and cam drives. This type of drive reduces noise and vibration due to its low engagement angle and links engagement with the sprocket. However, these applications are not limited to timing and cam drives; they can also be used for front-wheel power transmission. For example, silent drive chains are designed to resemble those used in NASCAR racing engines.
The design of the silent drive chain is based on the structure of the roller chain. Its components are standardized and manufactured according to pitch. There are single-row and multi-row versions. Quiet chains, also known as inverted tooth chains, are shaped to reduce noise from stretching. It’s also designed to minimize the amount of friction caused by small changes in pitch. Its teeth don’t slide against each other, so the chain is smoother and more durable.

flat top chain

One of the important parts of the flat top chainplate system is the hinge pin, which is used to fix the chainplate and is responsible for the smooth and efficient conveying of the chainplate. There are several types of hinge pins, including single hinge pins and double hinge pins. The single hinge pin is suitable for the chainplate with a small span and small bearing capacity, and the double hinge pin is suitable for the chainplate with a large span and high bearing capacity.
The side bending flat top chain is suitable for conveying large and medium workpiece pallets. They can be made of steel or plastic, each with its own advantages. Both chainplates are designed to convey material smoothly. Side curved flat-top chains can be used on straight conveyors. They have a low coefficient of friction and can transport weights up to 1.2 kg/cm. They can also be combined with HD profiles.
Flat top drive chains are usually made of plastic material and come in two types: tabletop chains and buffer chains. They come in a variety of widths, but the most popular are standard widths, ranging from 3.25 inches to 12 inches. MatTop chains are usually shipped in 10-foot lengths. They come in different styles, but they all have the same basic specs. Tabletop chains are designed for general conveying, while pad chains are used for specific applications. Solid top chains are suitable for conveying bulk materials, while wide pad chains can handle large volumes of fluids and/or solid-solid mixtures.
These chain conveyors can be used to convey, connect or lift small items. This type of chain is especially useful in industries where the product is hot or greasy. The modular design of these chains allows them to be configured in three dimensions, making them suitable for production changes and transitions. They also help reduce slack in the chain. Flat top chains are commonly used in final assembly and mechanical or paint restoration in the automotive industry.

double chain

Besides the roller chain, another type of chain drive is the double drive chain. This type of chain consists of a series of short cylindrical rollers connected together by side links and driven by gears called sprockets. This type of chain is very reliable and only requires a tractor with a high rpm PTO. It is manufactured by CZPT and is available in many different sizes and finishes.
chain

Self-lubricating chain

Self-lubricating drive chains are the ideal solution for applications that do not require the relubrication of conventional chains. This maintenance-free roller chain features fully heat-treated components that increase the chain’s fatigue resistance and strength. It’s sintered alloy bushings are oil-impregnated, reducing the chance of premature wear and elongation. Its self-lubricating properties enhance its durability and work well even in hard-to-reach places.
CZPT self-lubricating roller chains feature preloaded sintered steel bearing pins and oil-impregnated sintered bushings. These chains are drop-in replacements for standard roller chains and run on the same sprockets as standard chains. In addition to being maintenance-free, self-lubricating roller chains are compatible with most existing sprockets and are ideal for demanding applications.
The O-ring chain concept was used to develop self-lubricating systems. It has two or more annular grease storage chambers. A self-lubricating bushing roller chain has an oil reservoir between its pin chain and the roller chainplate. A grease seal between these two plates isolates the moving parts and keeps the joints well lubricated. O-rings are made of special nitrile rubber, whose properties vary by application.
CZPT SLR conveyor chains and CZPT SLR drive chains have rollers on sintered bushings. CZPT SLR chains and SLR conveyor chains are self-lubricating and have a higher working load than standard ANSI chains. They may not be interchangeable with other self-lubricating chains from other manufacturers. Self-lubricating drive chains are the best solution for demanding industrial applications requiring heavy-duty, reliable conveying.

China Black Finished Alloy Steel G80 Load Chain     safety chain for bush hogChina Black Finished Alloy Steel G80 Load Chain     safety chain for bush hog
editor by czh 2023-01-23